GCT Panels
GCT Structural Insulated Building Components are prefabricated lightweight structural sections for all building needs. The sections consist of an EPS core that is sandwiched between two layers of galvanized high strength wire mesh.
 
A galvanized wire connector wire is pierced through the EPS core and welded to each of the outer galvanized mesh layers. This meshwork is made from steel having a minimum yield of 87,000 psi and a minimum fracture of 99,000 psi. This configuration complies with ACI, section 3.5.3.5 and IBC, section 1903.
 
GCT Structural Insulated Building Components are covered in the field, with a high strength mortar compliant to ASTM C-387 such as GCT Structural Mortar Mix.
 
GCT Structural Insulated Building Component System is manufactured with M2® Technology and our proprietary design meet the following requirements under the Technical Evaluation Report performed by Structural Building Components Research Institute (SBCRI) and DrJ Engineering, LLC:
 
Applicable Codes and Standards:
 
  • 2006, 2009 and 2012 International Building Code (IBC)
  • 2006, 2009 and 2012 International Residential Code (IRC)
  • ACI 318- Building Code Requirements for Structural Concrete
 
GCT Technical Report (TER) by DrJ Engineering on Limit State, ASD and Foundation specifications.   Technical Report fire Resistance Ratings - IBC Section 721 - Ballistic Test UL - 752 and NIJ Level II and III.
Florida
Mississippi
Texas
Technical Reports
by DrJ Engineering
TER 1202-12.ls
TER 1202-12.ls
TER 1202-12.ls
TER 1202-12.f
TER 1202-12.f
TER 1202-12.f
TER 1202-12.asd
TER 1202-12.asd
TER 1202-12.asd
TER 1201-4
TER 1201-4
TER 1201-4